Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 98
Broadcom Confidential and Proprietary
-e<DEC> Enable MBA Protocol (def=0), 0. PXE, 1. RPL, 2. BOOTP
-s<DEC> Specify MBA Speed (def=0), 0. auto, 1. 10HD, 2. 10FD, 3.
100HD, 4. 100FD
-a<DEC> Apply MBA setting to all ports on multiple device
(5718/5719/5720)
10.40 segencrc
Command: segencrc
Description: Append a CRC to the specified block
Syntax: segencrc <start-end> | <start length>
10.41 secfg1
Command: secfg1
Description: Configure NVRAM Group 1
Syntax: secfg1
Options:
-m Mac address xx:xx:xx:xx:xx:xx
-r Power Dissipated D3:D2:D1:D0
-c Power Consumed D3:D2:D1:D0
-v Vendor ID
-d Vendor Device ID
-s SubSystem Vendor ID
-i SubSystem Device ID
-p PXE 1:Enable 2:Disable
-x PXE SP 0:Auto 1:10HD 2:10FD 3:100HD 4:100FD 6:1000FD
(TBI)
-w Magic Packet WOL 1:Enable 2:Disable

Broadcom NetXtreme Specifications

General

Manufacturer	Broadcom
Product Line	NetXtreme
Category	Adapter
Connector Type	RJ45
Supported OS	Windows, Linux
Features	TCP/IP Offload