Broadcom NetXtreme - Asfeng; New; Asfprg; Sleep

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 164
Broadcom Confidential and Proprietary
10.188 asfeng
Command: asfeng
Description: Enable/Disable ASF engineering mode.
Syntax: asfeng [options]
Options:
-d Disable ASF eingineering mode and Stop CPU
-e Enable ASF engineering mode and Cold Reset
10.189 new
Command: new
Description: Display new command available. The default parameter for [n] is 10
Syntax: new [n]
10.190 asfprg
Command: asfprg
Description: Program asf firmware into NVRAM. The default file names are asfinit.bin,
asfcpua.bin, and asfcpub.bin, which can be overwritten by parameters.
Syntax: asfprg [init_img [rx_img [tx_img]]]
Options:
-v<HEX> verbose level (0,1,2) (def=00000001)
10.191 sleep
Command: sleep
Description: delay execution for specified length of milliseconds. Can be used in script
files to delay program execution.
Syntax: sleep [milliseconds]
10.192 fillpattern
Command: fillpattern
Description: Fill WOL matching pattern into Misc. Memory Loacation.