Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 59
Broadcom Confidential and Proprietary
10.5 vpdgen
Command: vpdgen
Description: Generate a vpd file.
Syntax: vpdgen -f<string>
10.6 semode
Command: semode
Description: Configure NVRAM Mode.
Syntax: semode [auto | passthru | legacy | new]
Options:
-p Display page size
Example:
1. Set Serial EEPROM mode to Auto.
0:> semode auto
2. Display Current mode
0:> semode
Current mode : New NVRAM Access, Auto
device: Flash – ATMEL (with buffer)
10.7 seread
Command: seread
Description: Read NVRAM
Syntax: seread start[-end | len]
Note: Use “semode” command to configure the interface mode.
Example:
1. Set number base to hex, then read and display serial eeprom locations from 0x00 to
0x20
0:> radix 16
0:> seread 0-20
*** Dump Serial EEPROM (Auto Mode) ***
000000: 669955aa 08000000 00000069 00000200 d97b07d0 00000000 00000000 00000000
000020: 00000000

Broadcom NetXtreme Specifications

General

Manufacturer	Broadcom
Product Line	NetXtreme
Category	Adapter
Connector Type	RJ45
Supported OS	Windows, Linux
Features	TCP/IP Offload