Broadcom NetXtreme - Memsearch; Read

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 131
Broadcom Confidential and Proprietary
Description: Read PHY internal TAP values
Syntax: tapdump <dfe> | <echo> | <sd> | <mse>
10.107 memsearch
Command: memsearch
Description: Search a Data Pattern in Memory. The default, begin address = 0, and len =
0x20000. The data pattern must be specified.
Syntax: memsearch begin[-end | len] data
10.108 read
Command: read
Description: Read Memory
Syntax: read [!#*$~^lImSsxX]<begin> [-end | len]
! = Configuration space (32)
S = Configuration space (16)
X = Configuration space (8)
# = Registers (32) (default)
* = SRAM (32)
& = SRAM in Byte/ASCII format (32)
$ = NVRAM (SEEPROM/FLASH) (32)
m = MII registers (16)
~ = VPD Access (32)
I = indirect access of host memory (32)
^ = internal scratchpad (32)
l = direct access of host memory (32)
s = direct access of host memory (16)
x = direct access of host memory (8)