Broadcom NetXtreme - Setipmi; Setump; Seotp

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 175
Broadcom Confidential and Proprietary
10.227 setipmi
Command: setipmi
Description: Enable/Disable IPMI Passthrough Firmware
Syntax: setipmi
Options:
-e Enable IPMI Passthrough Firmware
-d Disable IPMI Passthrough Firmware
10.228 setump
Command: setump
Description: Enable/Disable UMP
Syntax: setump
Options:
-d Disable UMP
-e Enable UMP
10.229 seotp
Command: seotp
Description: Configure OTP
Syntax: seotp
Options:
-s Show OTP status
-w Update OTP bits
-r<HEX> Update the minor revision (hex) (def=00000000)
-v Get the minor revision
-f<string> filename