Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 172
Broadcom Confidential and Proprietary
10.217 writebr
Command: writebr
Description: Write a 32-bit value to bridge's configuration space register address.
Syntax: writebr <register address> <value>
10.218 findbridge
Command: findbridge
Description: Find all bridges in the system.
Syntax: findbridge
10.219 bridge
Command: bridge
Description: Switch to specified bridge.
Syntax: bridge
10.220 pere
Command: pere
Description: Enable parity error response on a bridge. Defaults to current bridge.
Syntax: pere <bridge>
10.221 perd
Command: perd
Description: Disable parity error response on a bridge. Defaults to current bridge.
Syntax: perd <bridge>
10.222 peclr
Command: peclr
Description: Clear parity error on bridge. Defaults to current bridge.
Syntax: peclr <bridge>

Broadcom NetXtreme Specifications

General

Manufacturer	Broadcom
Product Line	NetXtreme
Category	Adapter
Connector Type	RJ45
Supported OS	Windows, Linux
Features	TCP/IP Offload