Broadcom NetXtreme - Statusblk

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 122
Broadcom Confidential and Proprietary
-L Don't initialize packets
-M Enable low priority mail box
-N No statistics poling
-R Enable RS232 statistic update
-S TCP segmentation test -V<DEC> Create IPV4 or IPV6 IPS
packets. (def= V4)
1: Random mix Non-IPsec/IPsec packets
2: Random GCM/GMAC salt.
4:Random encryption/authentication keys.
7: Random all above.
-T<DEC> SBDLT value of the first packet of an ISO stream (def =0)
-U Use external loopback on 5714/5715
-V<DEC> IPSEC test for IPv4/IPv6 (def =4)
-X<DEC> Show IPSEC debug message
-Z<DEC> Max segment size (def =0)
10.82 statusblk
Command: statusblk
Description: Display Status Block
Syntax: statusblk
Example:
0:> statusblk
************** STATUS Block @ 0x0027c040 *************
Status : 0x0000
Rx Standard CIdx : 0 Rx Jumbo CIdx : 0 Rx Mini CIdx : 0
Rx PIdx[00] : 0 Send CIdx[00] : 0
Rx PIdx[01] : 0 Send CIdx[01] : 0
Rx PIdx[02] : 0 Send CIdx[02] : 0
Rx PIdx[03] : 0 Send CIdx[03] : 0
Rx PIdx[04] : 0 Send CIdx[04] : 0
Rx PIdx[05] : 0 Send CIdx[05] : 0
Rx PIdx[06] : 0 Send CIdx[06] : 0
Rx PIdx[07] : 0 Send CIdx[07] : 0
Rx PIdx[08] : 0 Send CIdx[08] : 0