Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 121
Broadcom Confidential and Proprietary
-l<DEC> Start packet length (def=txcfg)
-m Use multiple Tx ring test (def=txcfg)
-n<DEC> Number of packet to transmit (def=0)
-o<HEX> Buffer Offset (def=00000000)
-p<DEC> Number of Tx rings to use in multiple ring test (def=txcfg)
-q<DEC> Number of Packets per ring (def=txcfg)
-r<DEC> Tx ring number (def=txcfg)
-v Insert fragment count and fragment size into the packet
-x Display Statistics (always on: kept for bcmediag compatibility
-u Standard Fragmentation
-v Insert fragment count and fragment size into the packet
-w<DEC> Low watermark max RxFrame value (0-65535)
-z<DEC> Minimum fragment size, -1=disable (def=-1)
-A Use static buffer
-B<HEX> Begin Cipher ID for the IPSec test. (This command only valid for the
IPSec supported devices).
-C Software build the IPSec packets when transmit
-D<DEC> Launch time interval between ISO packets in ms (def=100)
-E<HEX> End Cipher ID for the IPSec test. (only valid for IPSec supported
devices). Combine this options with –B<HEX> options can specify
the testing range of IPSec algorithm.
-F<HEX> IPSEC enabled, with cipher_id (hex) (def=00000000)
-G<HEX> IPSec random test.
-H<DEC> IPSec packets percentage if –G1 option is added (def=50)
-I Enable ISO support.
-K Apply CRC-32 check on Rx path.

Broadcom NetXtreme Specifications

General

Manufacturer	Broadcom
Product Line	NetXtreme
Category	Adapter
Connector Type	RJ45
Supported OS	Windows, Linux
Features	TCP/IP Offload