Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 127
Broadcom Confidential and Proprietary
-n<DEC> Number of read/write accesses (def=1)
-r<string> Register offset
10.92 pcimrd
Command: pcimrd
Description: Test an individual register. Test an individual register with a specified number
of reads/writes.
Syntax: pcimrd
Options:
-d<DEC> Delay in uS (def=0)
-n<DEC> Number of read/write accesses (def=1)
-r<string> Register offset
10.93 inband
Command: inband
Description: Force inband
Syntax: inband
Options:
-s<HEX> Standard inband only(5701 GPHY) 0:disable, 1:enable (def=0)
-x<HEX> Extend inband, 0:disable Tx/Rx, 1:enable Tx, 2:enable Rx,
3:enable Tx/Rx. (def=0)
10.94 mwrite
Command: mwrite
Description: Write PHY registers via MII Management interface
Syntax: mwrtie <addr > <data>
Address range: 0x00 – 0x1F
Example:
1. Write 0x15 to MII register 2

Broadcom NetXtreme Specifications

General

Manufacturer	Broadcom
Product Line	NetXtreme
Category	Adapter
Connector Type	RJ45
Supported OS	Windows, Linux
Features	TCP/IP Offload