Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 138
Broadcom Confidential and Proprietary
g = APE registers (32)
p = APE Peripheral registers (32)
u = APE UART registers (32)
r = APE shared memory (32)
h = APE Scratchpad memory (32)
M = 5717 APE Mutex registers (32)
o = OTP registesr (32)
10.114 cread
Command: cread
Description: Read PCI configuration Space of specified device. default - 32 bits read, S - 16
bits read, X - 8 bits read
Syntax: cread <bus> <dev> <func> [S|X]<begin> [-end | len]
10.115 cwrite
Command: cwrite
Description: Write PCI configuration space of specified device. default - 32 bits read, S - 16
bits read, X - 8 bits read
Syntax: cwrite <bus> <dev> <func> [S|X]<begin> [-end | len] data
10.116 pcird
Command: pcird
Description: Read PCI configuration word.
Syntax: pcird <bus> <dev> <func> <addr>
Example: pcird 2 1 0 8 : pcird 2 1 0 8 : Read PCI device 1,
function 0 on bus 2.
10.117 pciwr
Command: pcird
Description: Write PCI configuration word.
Syntax: pcirwr <bus> <dev> <func> <addr> <dword>

Broadcom NetXtreme Specifications

General

Manufacturer	Broadcom
Product Line	NetXtreme
Category	Adapter
Connector Type	RJ45
Supported OS	Windows, Linux
Features	TCP/IP Offload

Summary

1 Introduction

2 Prerequisites

OS and Software Requirements

Specifies required OS versions and software executables.

3 Diagnostic Tests

Register, Memory, and Data Tests (Groups A, B, D)

Details tests for registers, memory, and data operations.

APE and Carrier Tests (Groups E, F, G)

Covers APE and physical layer connectivity tests.

4 Command Line Option Parameters

Parameter Descriptions

Explains various command-line options for diagnostics.

10 Test and Functions Description

VPD and NVRAM Configuration Commands

Details VPD and NVRAM configuration commands.

Firmware Upgrade and System Commands

Covers firmware upgrades and system commands.

11 Error Messages