Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 156
Broadcom Confidential and Proprietary
Description: Display debugs information
Syntax: debug <n>
1: Dump TX / RX Stats
2: Dump Clock Scale info
3: Clear worst interrupt latency
4: Toggle indirect access flag
5: Toggle PCI-X workaround
6: Dump chip registesrs
7: Dump driver config parametesrs
Example:
1. Display debug information.
0:> debug 1
Tx Packets Enqueued : 0
Tx Packet Complete : 0
Tx Packet Complete Error : 0
Rx Packets : 0
Rx Unknown Packets : 0
Rx Bad Packets : 0
Rx Good Packets : 0
10.166 gpiowrite
Command: gpiowrite
Description: Write a Value into GPIO pin
Syntax: gpiowrite <GPIO_num> < value>
Valid value for <GPIO_num> is 0-3, <value> is 0 or 1.
Example:
1. Write 1 to GPIO#1 Pin
0:> gpiowrite 1 1
Writing 1 to GPIO#1
10.167 gpioread
Command: gpioread

Broadcom NetXtreme Specifications

General

Manufacturer	Broadcom
Product Line	NetXtreme
Category	Adapter
Connector Type	RJ45
Supported OS	Windows, Linux
Features	TCP/IP Offload