Broadcom NetXtreme - 10 Test and Functions Description; VPD and NVRAM Configuration Commands

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 58
Broadcom Confidential and Proprietary
10 Test and Functions Description
10.1 vpdwrite
Command: vpdwrite
Description: Write data to VPD storage.
Syntax: vpdwrite <start[-end | len] value> | <filename>
File format:
Address range: 0x00 – 0xFF
num_bytes: 256 (max)
If only one argument is entered, filename is assumed. Otherwise, 'start [len] value' format
must be used.
10.2 vpdread
Command: vpread
Description: Read data from VPD storage
Syntax: vpdread start[-end | len]
Address range : 0x00 – 0xFF
num_byte : 256 (max)
10.3 vpdinfo
Command: vpdinfo
Description: Show VPD Information
Syntax: vpdinfo
10.4 vpdsecfg
Command: vpdsecfg
Description: Config vpd field.
Syntax: vpdsecfg