Broadcom NetXtreme - Secfgsb2; Secfgsb3

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 177
Broadcom Confidential and Proprietary
-l Design Type 0: NIC 1: LOM
-p Enable Phy Auto Power Down 0: No 1: Yes
-r Reversed Nway 0: No 1: Yes
-A Disable Power Saving 0: No 1: Yes
-B Led Mode 0: Mac 1:Phy1 2:Phy2 3:S Traffic 4:Shasta Mac 5:Wireless Combo
-C PCI Power Consumption/Dissipate 1:Default 2:Custom define
-c PCI Power Consumption/Dissipate Value D0:D3/D0:D3
-G Cable Sense 0: No 1: Yes
10.233 secfgsb2
Command: secfgsb2
Description: Configure Selfboot NVRAM Group 2
Syntax: secfgsb2
Options:
-D PCIE Pwr Consumption/Dissipate 1: Default 2: Custom define
-d PCIE Pwr Consumption/Dissipate Data;
Data: Pwr Rail: Type: State: Base Power
Select Data = 0-7
Pwr Rail = 0:12V; 1: 3.3V; 2: 1.8V; 7: Thermal; 99: Invalidate
Type = 0: PME 1: Aux 2: Idle 3: Sustained 7: Max
Pwr Mgt St = 0: D0 1: D1 2: D2 3: D3
Base Power = X in 0.1 Watt
10.234 secfgsb3
Command: secfgsb3
Description: Configure Selfboot NVRAM Group 3
Syntax: secfgsb3