Broadcom NetXtreme - Reset; Quit; Smbusmode

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 162
Broadcom Confidential and Proprietary
1. Memory Test Configuration Menu
2. Test Configuration Menu
3. Driver Configuration Menu
4. Abort On Failure is enabled
5. Save Configuration
Enter your choice or ESC to exit ->
10.181 reset
Command: reset
Description: Reset Chip
Syntax: reset
Options:
-c Simulate cold reset
-t Display time from reset to firmware invert signature
-w<DEC> Wait for firmware signature in ms (def=1)
-p Reset PCIE block along with GRC reset
10.182 quit
Command: quit
Description: Exit System
Syntax: quit
10.183 smbusmode
Command: smbusmode
Description: Set SMBIS in Auto or BitBang mode.
Syntax: smbusmode [options]
Options:
-a Auto mode
-b Bitbang mode
-r Regular mode