Broadcom NetXtreme - Txpkt

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 120
Broadcom Confidential and Proprietary
Description: Configure Phy Speed
Syntax: phyctrl
Options:
-f<string> file contains initialization scripts
-h force half duplex
-r reset PHYs
-q Query PHY state
-s<HEX> 0:10 Mbps, 1:100 Mbps, 2:1000 Mbps, 3 - Auto (def=00000002)
-r Force into External loopback mode
10.81 txpkt
Command: txpkt
Description: Transmit Packets. Driver must be loaded.
Syntax: txpkt
Options:
-a<DEC> Specify number of IP fragment count (def=0)
-b<DEC> Burst length (def=0)
-c Clear Statistics (always on: kept for bcmediag compatibility
-d<DEC> Interpacket delay in microseconds (def=txcfg)
-e Insert raw checksum into the packet
-f<DEC> Max number of fragments (def=1)
-g<HEX> Tx Flags (def=txcfg)
-h<DEC> Specifies IP total length (Default: correct IP length)
-I Incremental length
-j Random number of fragments
-k Use random packet length