Broadcom NetXtreme - Mdio; Wait; Ipsecsupport; Sadbtest

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 182
Broadcom Confidential and Proprietary
10.246 mdio
Command: mdio
Description: MDIO tests
Syntax: mdio
Options:
-v<HEX> read MII times (def = 00000200)
-t<HEX> available tests:
1: read MII registers with core clock override.
2: write/read/compare MII register with core clock override.
4: read MII registers without core clock override.
8: write/read/compare MII register without core clock override.
f: all above.
10.247 wait
Command: wait
Description: Delay for a bit.
Syntax: wait
Options:
-m<DEC> wait milli seconds (default=1000)
-u<DEC> wait micro seconds (default=1000)
10.248 ipsecsupport
Command: ipsecsupport
Description: Check device for IPsec support.
Syntax: ipsecsupport
10.249 sadbtest
Command: sadbtest
Description: Invoke the Security Association Database (SADB) test. Valid only for IPSec
supported devices.