Broadcom NetXtreme - Blast

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 114
Broadcom Confidential and Proprietary
-m<DEC> 1 for enable , 0 for disable
Example:
1. Driver must be loaded before configure.
0:> loaddrv
2. Enable MAC loop back.
0:> mcaclpk -m1
Enabling MAC loopback ... OK
2. Disable MAC loop back.
0:> maclpk -m0
Disabling MAC loopback ... OK
10.77 blast
Command: blast
Description: Blast Packets in Poll Mode and display statistics. Load MAC driver before
running the test.
Syntax: blast
Options:
-a<DEC> IP total length (def=0)
-c<DEC> Number of Tx buffer (def=100)
-d<DEC> Interpacket GAP in microseconds (def=0)
-e<DEC> Upper Limit of Tx buffer in incremental packet size (def=1514)
-f<string> Sniffer file containing contents of Tx packets
-g<DEC> Rx Threshold (def=5)
-h Enable Host Loopback
-i Increment length
-j Regenerate CRC-32 in host loopback mode
-k Applies CRC-32 check on Rx path
-l<DEC> Length of Tx packet (def=60)