Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 176
Broadcom Confidential and Proprietary
10.230 otpchk
Command: otpchk
Description: Check patch in OTP
Syntax: otpchk
Options:
-n Do not check configurations and all IDs
-m Check MAC and Config
-l<HEX> Interation (def=000000001)
-f<string> filename
10.231 defragment
Command: defragment
Description: Defragment NVRAM data.
Syntax: defragment
10.232 secfgsb1
Command: secfgsb1
Description: Configure Selfboot NVRAM Group 1
Syntax: secfgsb1
Options:
-m Mac address xx:xx:xx:xx:xx:xx
-v Vendor ID
-z Vendor Device ID
-s SubSystem Vendor ID
-i SubSystem Device ID
-w Magic Packet WOL 1: Enable 2: Disable
-o Limit WOL Speed to 10 0: No 1: Yes

Broadcom NetXtreme Specifications

General

Manufacturer	Broadcom
Product Line	NetXtreme
Category	Adapter
Connector Type	RJ45
Supported OS	Windows, Linux
Features	TCP/IP Offload