Brother DCP-L5652DN Service Manual

3-85
Confidential
(6) Remove the screw cup M3x8 (black) screw and two taptite bind B M4x12 screws.
Remove the low-voltage power supply PCB ASSY, and disconnect the low-voltage
power supply harness from the low-voltage power supply PCB ASSY.
Fig. 3-84
Fig. 3-85
Assembling Note:
• When attaching the low-voltage power supply PCB ASSY, engage the notch on the
low-voltage power supply PCB ASSY with the hook.
• Check that the heater harness is housed in the frame L as shown in the figure below.
Otherwise the harness may be caught in some sections of the machine, and may catch
fire.
Notch
Screw cup M3×8 (black)
Taptite bind B M4x12
Low-voltage power
supply PCB ASSY
Low-voltage power supply harness
Hook
Notch
Hook
Heater harness
Heater harness is
housed in frame L

Brother DCP-L5652DN Specifications

General

Printer Type	Laser
Functions	Print, Copy, Scan
Automatic Duplex Printing	Yes
ADF Capacity	50 sheets
Memory	256 MB
Processor	800 MHz
Monthly Duty Cycle	Up to 50, 000 pages
Print Speed	42 ppm
Print Resolution	1200 x 1200 dpi
Paper Input Capacity	250 sheets
Scanner Resolution	Up to 1200 x 1200 dpi
Connectivity	USB, Ethernet
Mobile Printing	Brother iPrint&Scan, Google Cloud Print, AirPrint, Mopria
Toner Yield	Standard: 3, 000 pages, High Yield: 8, 000 pages