Brother HL-2400C - Page 258

VIII-12
Service Call Message Description
99 SERVICE D6
HPSI Signal Error (Retract Error of Cyan and Magenta
Toner Cartridge)
99 SERVICE E1
Developing Motor Error
99 SERVICE E2
Main Motor Error
99 SERVICE E3
Transfer Drum Rotational Error
99 SERVICE E4
Toner Sensor PCB Error
99 SERVICE E5
Transfer Roller Solenoid Error
99 SERVICE E6
Brush Cleaner Solenoid Error
99 SERVICE E7
Brush Cleaner Clutch Error
99 SERVICE E8
Fusing Unit Clutch error
99 SERVICE E9
Belt Sensor Error
99 SERVICE EL
Erase Lamp Error
99 SERVICE F0
Control Fan Error
99 SERVICE F2
Ozone Fan (1) Error
99 SERVICE F4
Fuser Fan Error
99 SERVICE F5
Charging HV (DC High Voltage) Error
99 SERVICE H0
Fuser Thermistor Error
99 SERVICE H2
Fusing Temperature Error (Warming-up Time Error)
99 SERVICE H3
Fusing Temperature (3) Error (Heater Continuous ON Time
Error)
99 SERVICE H4
Fusing Temperature (4) Error (Heater Continuous ON Time
Error)
99 SERVICE L1
Beam Sensor Error
99 SERVICE L2
Scanner Motor Error
99 SERVICE LL
Laser Power Error
Note:
For further actions for the error messages described in Table 8-4-2, refer to the flow
charts later in this section.