Brother MFC-9420CN - Using the BR-Script 3 (Postscript 3 Language Emulation) Printer Driver; For Mac os X Users; For Mac os 9.1 to 9.2 Users

Printing and Faxing
7 - 15
7
Using the BR-Script 3 (PostScript
®
3
™
language emulation)
printer driver
Note
■
To use the BR-Script 3 printer driver on a Network, see the Network User’s Guide on the CD-ROM.
■
To use the BR-Script 3 printer driver with a USB cable, you need to set the Emulation to BR-Script
3 by using the control panel before connecting the USB cable. (See Printer Emulation Support on page
7-3.)
■
The BR-Script 3 printer driver does not support PC-Fax Sending or Secure Print.
For Mac OS
®
X users
You need to install the BR-Script 3 printer driver using the following instructions.
Note
■
If you use a USB cable and your Macintosh
®
is “Mac OS
®
X”, only one printer driver for a machine can be
registered in Print Center.
■
If a Brother Color Driver (MFC-9420CN) is already listed in the Printer list, you will need to delete it and
then install the BR-Script 3 printer driver.
1
Select
Applications
from the
Go
menu.
2
Open the
Utilities
folder.