ControlCenter2 (For Mac OS
®
X 10.2.4 or greater)
9 - 13
9
COPY / PC-FAX
The Copy buttons (1-4) can be customized to allow you to
take advantage of the features built into the Brother printer
drivers to do advanced copy functions such as N-in-1 printing.
Before you can use the
Copy
buttons you must first configure
the printer driver by clicking on the button while holding down
the Ctrl key.
You can enter up to a 30 character name in the
Name for
Copy
field and select
Copy Ratio
.
You can select the
Resolution
,
Scan Type
,
Document Size
,
Brightness
and
Contrast
settings to be used.
If you want to scan and then crop a portion of a page after
pre-scanning the document, check
Show Scanner Interface
box.
Before finishing the
Copy
button configuration, you must set
the
Printer Name
. Then select your print settings from the
Presets pull-down list, then click OK to close the window. By
clicking the configured copy button, the print dialog window
will open.
To copy, choose
Copies & Pages
from the pop-up menu.
To fax, choose
Send Fax
from the pop-up menu. (See
Sending a fax on page 7-19.)
Note
You must configure each of the copy buttons before they can be used.
To Next Page
Loading...
