ControlCenter2 (For Mac OS
®
X 10.2.4 or greater)
9 - 15
9
Status Monitor
The
Status Monitor
button allows you to monitor the status of one or more devices, allowing you to get
immediate notification of errors such as paper empty or paper jam. (See Status Monitor on page 7-6.)
Colour Calibration
You can carry out calibration to revise the colours. The output density for each colour may vary depending
on the environment the machine is in, such as temperature and humidity. You can improve the colour density
by this setting.
Get the Device Calibration Data
You can get the calibration data from the device.
To Next Page
Loading...
