Brother MFC-9420CN - Accessing the Scanner

Scanning
2 - 2
2
Accessing the Scanner
1
Open the software application (ScanSoft
®
PaperPort
®
9.0SE) to scan a document.
Note
The instructions for scanning in this guide are relevant for ScanSoft
®
PaperPort
®
9.0SE. If you are scanning
into another software application, the steps may vary.
2
Click
File
, then
Scan
. Or select the
Scan
button.The Scan panel appears in the left side of the screen.
3
Choose the scanner you are using from the
Scanner
drop-down list box.
Note
If the machine is connected via:
■
Parallel cable use
Brother MFC-9420CN
■
USB cable use
Brother MFC-9420CN USB
■
LAN cable use
Brother MFC-9420CN LAN
If you are using Windows
®
XP, select
TW-Brother MFC-9420CN
, not
WIA-Brother MFC-9420CN
.
4
Click
Scan
.
The
Scanner Setup
dialog box will appear: