Brother MFC-9420CN - Scan to Image; Scan to OCR

Network Scanning (For Mac OS
®
X 10.2.4 or greater)
10 - 5
10
Scan to Image
When you select Scan to Image your document will be scanned and sent directly to the Macintosh
®
you
designated on your network. ControlCenter2 will activate the default graphics application on the designated
Macintosh
®
. You can change the scan configuration. (See Image (example: Apple PreView) on page 9-4.)
1
Place the document face up in the ADF, or face down on the scanner glass.
2
Press
Scan
.
3
Press
▲
or
▼
to select Scan to Image.
Press
Menu/Set
.
4
Press
▲
or
▼
to select the destination Macintosh
®
you want to send to.
Press
Menu/Set
.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination Macintosh
®
on the control panel.
Press
Menu/Set
.
The machine will start the scanning process.
Scan to OCR
When you select Scan to OCR your document will be scanned and sent directly to the Macintosh
®
you
designated on your network. ControlCenter2 will activate Presto!
®
PageManager
®
OCR and convert your
document into text for viewing and editing from a word processing application on the designated Macintosh
®
.
You can change the scan configuration. (See OCR (Word Processing program) on page 9-5.)
1
Place the document face up in the ADF, or face down on the scanner glass.
2
Press
Scan
.
3
Press
▲
or
▼
to select Scan to OCR.
Press
Menu/Set
.
4
Press
▲
or
▼
to select the destination Macintosh
®
you want to send to.
Press
Menu/Set
.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination Macintosh
®
on the control panel.
Press
Menu/Set
.
The machine will start the scanning process.