Brother MFC-9420CN - Scanning a Document Using the WIA Driver (for Windows XP Only); WIA Compliant; Accessing the Scanner

Scanning
2 - 8
2
Scanning a document using the WIA driver
(For Windows
®
XP only)
WIA compliant
Windows
®
XP uses Windows
®
Image Acquisition (WIA) for scanning images from the machine. You can scan
images directly into the PaperPort
®
9.0SE viewer that Brother included with your machine or you can scan
images directly into any other software application that supports WIA or TWAIN scanning.
Accessing the scanner
1
Open your software application to scan the document.
Note
The instructions for scanning in this Guide are for when you use ScanSoft
®
PaperPort
®
9.0SE. The steps for
scanning from another application may vary.
2
Select
Scan
from the
File
drop-down menu or select the
Scan
button.
The Scan panel appears on the left of the screen.
3
Select
WIA-Brother MFC-9420CN
from the
Scanner
drop-down list box.
Note
■
If the machine is connected via:
Parallel cable use
WIA-Brother MFC-9420CN
USB cable use
WIA-Brother MFC-9420CN USB
LAN cable use
WIA-Brother MFC-9420CN LAN
■
If you choose
TW-Brother MFC-9420CN
, the machine will scan using the TWAIN driver.
4
Click
Scan
.
The Scan dialog box will appear: