Brother MFC-9420CN - Device Settings; Remote Setup; Quick-Dial; Status Monitor

ControlCenter2
3 - 16
3
DEVICE SETTINGS
In this section you can configure the machine settings by
clicking the button.
Note
When the machine is connected to a network, you cannot use
Remote Setup
and
Quick-Dial
functions.
Remote Setup
The
Remote Setup
button allows you to open the
Remote
Setup
Program window with which you can configure the
machine setting menus.
Quick-Dial
The
Quick-Dial
button allows you to open the
Set Quick-Dial
window of the
Remote Setup
Program, so you can easily
register or change the dial numbers from your PC to the
machine.
Status Monitor
The
Status Monitor
button allows you to monitor the status of one or more devices, allowing you to get
immediate notification of errors such as paper empty or paper jam. (See Status Monitor on page 1-7.)