Network Scanning (For Mac OS
®
X 10.2.4 or greater)
10 - 2
10
Registering your Macintosh
®
with the machine
To use the
“Scan To”
button on the machine you must register your Macintosh
®
with the machine.
1
From
Library
, select
Printers
,
Brother
,
Utilities
and
DeviceSelector
, and then double click
DeviceSelector
.
The
DeviceSelector
window appears. This window can also be opened from the ControlCenter2.
2
Turn on
Register your computer with the “Scan To” functions at the machine
and enter the name
you want displayed on the machine for your Macintosh
®
(Max. 15 characters).
3
Click the
OK
button.
Note
You can avoid receiving unwanted documents by setting a 4-digit Pin number. Turn on
“Scan To” button
PIN number for this computer
. Enter your Pin number in the
Pin number
and
Retype Pin number
field.
To send data to a computer protected by a Pin number, the Display prompts to enter the Pin number before
the document can be scanned and sent to the machine. (See Using the Scan Key on page 10-3 to 10-6.)
To Next Page
Loading...
