ControlCenter2 (For Mac OS
®
X 10.2.4 or greater)
9 - 4
9
SCAN
This section contains four buttons for
Scan to Image
,
Scan
to OCR
,
Scan to E-mail
and
Scan to File
applications.
These four selections can be accessed from ControlCenter2
or from the
Scan
key on the control panel of the machine. The
Target Application
,
File Type
and scan settings are
configured independently by choosing the
Software Button
or
Device Button
tabs of the
ControlCenter2
Configuration
window.
Image (example: Apple PreView)
Scan to Image
feature allows you to scan an image directly
into your graphics application for image editing. To change
the default settings, click on the button while holding down the
Ctrl key and select
Software Button
or
Device Button
.
If you want to scan and then crop a portion of a page after
pre-scanning the document, check
Show Scanner Interface
box.
Change the other settings, if needed.
To change the destination application, select the appropriate
application from the
Target Application
pull down list. You
can add an application to the lists by clicking the
Add
button.
Enter the
Application Name
(up to 30 characters) and select
your preferable application by clicking the
Browse
button.
Also choose the
File Type
from the pull-down list.
To Next Page
Loading...
