5-73
Confidential
AMS04 (Maintenance assurance 2)
• Selector 2: Home key switch in sleep mode
Select whether the Home key blinks or turns off when the machine is in sleep mode.
Note Update the firmware to the latest version before using this function.
• Selector 3: Black ink print mode
If any color ink runs out, printing is no longer possible by default. Setting this
selector to "1" allows the machine to function as a monochrome printer, making it
possible to print with black ink only even in a "Replace Ink" state as listed below.
Tip: Difference between selector 3 on AMS04 and selector 8 on WSW49 (For
details, refer to the "Worker Switches (WSW)" document separately issued.)
Both selector 3 on AMS04 and selector 8 on WSW49 specify the similar black ink
print mode that applies if any color ink runs out. The difference is that the former
allows the machine to print all data received as a monochrome printer with black
ink only; the latter to ignore the "Replace Ink" state, receive both color and black
data, and print it, resulting in a printout missing color components.
• Selectors 4 and 8: Automatic purging for color ink and for black ink
The machine periodically performs an automatic purge by default. The automatic
purge, however, wastes ink when no printing has occurred. To avoid it, disable the
automatic purge with these selectors. In the first printing after a long no-print
period, disabling it may lower the print quality.
Setting selector 4 or 8 to "1" disables the setting made by selectors 6 and 7.
Selector
No.
Function Setting and Specifications
1 Not used.
2 Home key switch in sleep mode 0: Blink (default) 1: Turn off
3 Black ink print mode 0: Disable (default) 1: Enable
4 Automatic purging for color ink 0: Enable (default) 1: Disable
5
FAX plain paper monochrome
printing direction switch
0:
Bidirectional (default)
1:
Unidirectional
6
7
Periodical purging interval
No. 6 7
0 0 : Prescribed purge intervals
0 1 : 30 days (black), 60 days (color)
1 0 : 30 days (black), no purge (color)
1 1 : No purge (black and color)
8 Automatic purging for black ink 0: Enable (default) 1: Disable
Printing FAX message
received
Monochrome printing only possible. (A color FAX message
will be printed in monochrome.)
Printing from a PC No printing possible.
Copying
Monochrome printing only possible. The Mono key is
enabled, but the Color key is disabled.
Printing from memory cards No printing possible.
Printing via PictBridge No printing possible.
Printing lists Monochrome printing only possible.
Purge operation
Purge operation possible for black ink only, not possible for
all-color or any specific color.
To Next Page
Loading...
Need help?
General
