5-74
Confidential
• Selector 5: FAX plain paper monochrome printing direction switch
Switch between bidirectional and unidirectional printing for FAX plain paper
monochrome printing.
• Selectors 6 and 7: Periodical purging intervals
These selectors allow you to select the periodical purge interval to reduce ink
consumption.
Setting these selectors "0, 0" (Prescribed purge intervals) performs purging at the
intervals.
Setting these selectors to "1, 0" (30 days (black), no purge (color)) disables the
setting made by selector 4.
Setting these selectors to "1, 1" (No purge (black and color)) disables the settings
made by selectors 4 and 8.
AMS05 (Printing assurance 3)
• Selector 1: Uneven printing correction for upper and lower ends of the nozzle
If performing the correction lowers the print quality due to wrong nozzle property
data, set this selector to "1" to disable the correction function.
• Selector 2: ON/OFF switch for the corrugation value checking function
Turn on or off the function for changing the multiplication coefficient based on the
corrugation value stored in EEPROM.
Selector
No.
Function
Setting and Specifications
1
Uneven printing correction for
upper and lower ends of the
nozzle
0: ON (default) 1: OFF
2
ON/OFF switch for the
corrugation value checking
function
0: ON (default) 1: OFF
3
|
5
Not used.
6
|
8
Adjustment of print head drive
voltage rank
No.678
000:+0
100:-0
001:+1
010:+2
011:+3
101:-1
110:-2
111:-3
To Next Page
Loading...
Need help?
General
