Confidential
2-16
Error
Code
Contents
Refer to
page:
9F01 3rd tray paper feed motor encoder sensor cannot detect rotation of the
3rd tray paper feed motor.
2-50
A000 Time out occurred during data transfer for second side document
scanning.
2-50
A100 Document scanner sensor detects that document scanner is open. 2-50
A200 Document scanning position sensor detects length of document 900 mm
or more.
2-51
A300
Document detection sensor detects that document is pulled out during
document scanning. Or, the document scanning position sensor cannot
detect document within specified time.
2-51
A400 ADF cover sensor detects that ADF cover is open. 2-52
A500 Level of CIS scan result is detected as abnormal during the first side fax
sending. (During the first sending)
2-52
A600 Level of CIS scan result is detected as abnormal during the first side fax
sending. (After retrying)
2-52
A700 Type of cis unit and CIS type input value does not match. 2-52
AC00 Level of CIS scan result is detected as abnormal during the second side
fax sending. (During the first sending)
2-53
AD00 The required number of pixels of the scanning data is not output, and it
does not finish normally.
2-53
AF00 CIS positioning abnormal (Home position cannot be found) 2-54
BC00 Level of CIS scan result is detected as abnormal during the second side
fax sending. (After retrying)
2-53
BF00 Document scanning position sensor detects that the document’s length
does not fit duplex scanning.
2-54
D100 Modem PCB initialization failed. 2-54
D200 SDAA communication failure 2-54
D800 Touch panel initialization failed. 2-55
E200 Wired LAN MAC address not registered. 2-55
E300 Wireless LAN connection error 2-55
E600 Main PCB EEPROM write error 2-55
E900 NFC PCB initialization failed. 2-55
EC00 A USB device out of the specifications is inserted to the USB terminal,
and consequently over current flows.
2-56
F000 Flash file system error 2-56
F001 Flash ROM read problem 2-56
FD00 Firmware verification during the self test fails. 2-56
FD01 System resource error 2-56
FE00 ROM data acquisition error 2-56