BRP Evinrude E-TEC Icon Pro Series - Page 59

57
Fuel Tank Capacity
Enter the FUEL SETUP menu then:
1.) Use the UP or DOWN buttons to select TANK SIZE.
2.) Press and hold the MODE button to enter the TANK SIZE menu.
3.) Use the UP or DOWN buttons to set the capacity of that fuel tank.
4.) Press and hold the MODE button to save the setting.
5.) The LCD screen will display SETTING SAVED! and the gauge will
issue an audible beep.
NOTE: Holding the UP or DOWN button will increase or decrease the
amount in a more rapid fashion.
010052
010053