Introduction
H172204_1_001 9 / 92
2 Introduction
This manual is intended to be used by trained device users. This user manual contains
information and safety information that are necessary for the safe operation of the device.
Any user maintenance and repairs are to be accomplished using the information in this
manual.
Consider all safety references!
2.1 Intended Use
The device has been designed and constructed solely for the intended use described here.
The HPPR/2 units must only be used for the limited purpose of transmitting, switching and
amplifying of dedicated RF signals in Bruker AVANCE spectrometers.
Intended use also includes compliance with all specifications in this manual.
Any use which exceeds or differs from the intended use shall be considered improper use.
No claims of any kind for damage will be entertained if such claims result from improper use.
2.2 Installation and Initial Commissioning
Installation, initial commissioning, retrofitting, repairs, adjustments or dismantling of the
device must only be carried out by Bruker Service or personnel authorized by Bruker.
Damage due to servicing that is not authorized by Bruker is not covered by your warranty.
2.3 Limitation of Liability
All specifications and instructions in this manual have been compiled taking account of
applicable standards and regulations, the current state of technology and the experience and
insights we have gained over the years.
The manufacturer accepts no liability for damage due to:
• Failure to observe this manual
• Improper use
• Deployment of untrained personnel
• Unauthorized modifications
• Technical modifications
• Use of unauthorized spare parts
The actual scope of supply may differ from the explanations and depictions in this manual in
the case of special designs, take-up of additional ordering options, or as a result of the latest
technical modifications.
The undertakings agreed in the supply contract as well as the manufacturer's Terms and
Conditions and Terms of Delivery and the legal regulations applicable at the time of
conclusion of the contract shall apply.
To Next Page
Loading...
Need help?
General
