Transport, Packaging and Storage
H172204_1_001 21 / 92
4.3 Packaging
About Packaging
The individual packages are packaged in accordance with anticipated transport conditions.
Only environmentally friendly materials have been used in the packaging.
The packaging is intended to protect the individual components from transport damage,
corrosion and other damage prior to assembly. Therefore do not destroy the packaging and
only remove it shortly before assembly.
Handling Packaging Materials
Keep the original container and packing assembly, at least as long as the warranty is valid, in
case the unit has to be returned to the factory. When the packaging material is no longer
needed dispose of it in accordance with the relevant applicable legal requirements and local
regulations.
4.4 Storage
Storage of the Packages
Store the packages under the following conditions:
• Do not store outdoors.
• Store in dry and dust-free conditions.
• Do not expose to aggressive media.
• Protect against direct sunlight.
• Avoid mechanical shocks.
• Storage temperature: 15 to 35 °C.
• Relative humidity: max. 60%.
• If stored for longer than 3 months, regularly check the general condition of all parts and
the packaging. If necessary, top-up or replace preservatives.
Under certain circumstances, storage instructions may be affixed to packages which expand
the requirements specified here. Comply with these accordingly.
To Next Page
Loading...
Need help?
General
