Cover2 Module
H172204_1_001 37 / 92
6.1.6 Devices Tab
The Devices tab shows all the so called ‘connected devices‘ which can be connected at the
rear side of Cover2.
Figure6.4: Devices Tab
The rear side from left to right is shown on the LCD from top to bottom.
The following devices can be shown:
‘--‘ Disconnected / empty socket
‘CRP‘ Cryoprobe
‘ATMA‘ ATMA resp. CRP-ATMA probe
‘PICS‘ Probe Identification System
‘HWIDS‘ Hardware Identification System
By connecting or disconnecting a connected device the host changes to the Device tab.
The red Error LED shows a possible error on the host.
6.1.7 Wobble Tab
The Wobble tab shows the modules short name and the corresponding wobble curve if any
module is configured to wobble.
Figure6.5: Wobble Tab
To Next Page
Loading...
