13
EN
NOTE
A comparison of the displayed vol-
umes using a domestic water meter is not
possible.
Water and regenerative consumption
Regenerative level (via ultrasound sensor in the
Easy Fill technology cover)
and other maintenance work
4.5 Interaction
A BWT mineral metering unit can be plugged into
the unit at any time.
Up to 10 AQA Guard Wireless Water Sensors (order
no. 11772) can be taught.
4.6 Connectivity
BWT DES (BWT Digital Eco System)
Various functions may be available depending on
the product and market:
GSM connection to the server for full functionality
and database updates.
Wi-Fi or LAN connection to your local network to
control and monitor the product via PC, smart-
phone or tablet.
EnOcean® interface for the AQA Guard function.
Connectivity extends the functionality of the product
and allows the system to be registered in order to
use advanced operating and maintenance functions
via the
BEST WATER HOME
app.
NOTE
Depending on the product, not all types
of connectivity are available.
The brine collects in a special sink of the regen-
erative container and is fully extracted from there.
After brine extraction, there is no liquid left in the
regenerative container.
An ultrasound sensor in the Easy Fill technology
cover measures the regenerative level.
The regeneration is proportional. 100% regener-
ation takes place after 72 hours at the latest for
hygiene purposes.
4.3 Regenerative monitoring
100% in the multi-info touch display corresponds
From a level of around 20%, the device status
4.4 Multi-info touch display
The product is equipped with a touch display. It
can be operated intuitively and provides a quick
overview of all product parameters.
During start-up, you can select basic parameters
on the display:
Country-specific settings at the location of
operation
Unit for measuring water hardness at the loca-
tion of operation (°dH, °f, mol/m
3
, ppm calcium
carbonate)
value stored in the hydromaps water hardness
database for the location of operation)
Desired outlet water hardness
Depending on your settings, you will see the current
parameters on the display during operation:
Outlet water
= ow volume in l/h
Inow water
Blending valve
Fully softened water
= displayed volume in litres
To Next Page
Loading...
