6
EN
1.4 Transport and installation
To avoid damage during transport to the installa-
tion location, do not remove the product from the
packaging until you have reached the relevant lo-
cation. Then dispose of the packaging in the correct
manner. Check that the delivery is complete.
When there is a risk of frost, empty all water supply
parts.
Lift or transport the product or its components only
from the designated suspension eyes or attachment
points.
and level horizontal surface and adequately secure
it against falling or tipping.
1.5 Symbols used
The following symbols in this documentation
information:
General danger to persons, sys-
tems or the environment.
Danger caused by the mains
voltage.
Risk of death by electric shock!
Instructions must be observed for
safe operation.
Remove the mains plug.
Information that should be noted.
The product must not be disposed
of in household waste.
Recycle the product after decom-
missioning.
To Next Page
Loading...
