7
EN
1.6 How safety instructions are
displayed
In this document safety instructions precede any
sequence of actions that could cause harm to per-
sons or damage to property. All hazard prevention
measures must be followed.
Safety instructions are displayed as follows:
SIGNAL WORD!
Source of hazard
(e.g. electric shock)
Type of hazard (e.g. risk of fatal injury)!
Ways to prevent the hazard
Signal word Colour Severity of the hazard
DANGER
High-risk hazard.
Indicates a hazardous
situation which, if not
avoided, will result in
death or serious injury.
WARNING
Hazard with a moder-
ate degree of risk.
Indicates a hazardous
situation which, if not
avoided, could result in
death or serious injury.
CAUTION
Low-risk hazard.
Indicates a hazardous
situation which, if not
avoided, may result in
minor or moderate injury.
NOTE
Important information
and helpful tips.
1.7 Product-specic safety
instructions
DANGER!
Mains voltage!
Risk of death by electric shock!
Unplug device before any service and
repair work.
If the mains cable of the unit becomes
damaged, you must replace it with the origi-
nal cable from the manufacturer.
-
certain safety-relevant actions on the device.
To Next Page
Loading...
Need help?
General
