61
EN
12.3 Remote operation of the product
via the home network (LAN / Wi-Fi)
You can operate the product remotely if it is connect-
ed to the home network via LAN or Wi-Fi.
NOTE
While operating the product via remote
connection, you must not change this
connection, otherwise access is no longer
possible.
The product and mobile device must be
in the same network.
To enable data transfer, the following
port must be open on your router: TLS /
SSL port 443
Requirements
The product was successfully registered.
The login code you received after registration
is available.
The connection via LAN or Wi-Fi is active and
working.
Open a web browser on a device connected to
the network.
Enter the IP address of the product into the
information here:
>
Info > Connection status
Enter the login code received via e-mail to estab-
lish the connection.
A connection to the product is established.
Operate your product via the remote connection
in the same way as you would via the display on
the product.
NOTE
While operating the product via remote
connection, you must not change this
connection, otherwise access is no longer
possible.
Holiday mode can only be activated via
remote connection, not deactivated.
To Next Page
Loading...
