60
EN
Establishing a direct Wi-Fi connection
NOTE
A direct Wi-Fi connection (access point)
is only possible within a close vicinity to
the product.
Note the WPA2 key and login code from
the e-mail you received when registering
your product.
Activate the
ACCESS POINT
function on the
product.
Search for Wi-Fi with the
BWTAP
SSID on your
mobile device.
Enter the WPA2 key received via e-mail.
Open a web browser on the mobile device.
Enter the IP address of the Wi-Fi provided by
your product into the address bar in the browser.
NOTE
Checking the IP address: The default IP
address is 192.168.110.1. You may need to
check the product to see if a different IP
address is being used (
Info
>
Connection
status
menu).
A connection to the product is established.
Enter the login code that you received during
registration via e-mail.
Operate your product via the direct Wi-Fi connec-
tion in the same way as you would via the display
on the product.
To Next Page
Loading...
