BWT Perla - 8 Start-up; 8.7 Completing Start-up Procedure; 9 Connection; Selecting Connection Type

26
EN
8.7 Completing the start-up procedure
Rinsing procedure
A rinsing procedure occurs after start-up. If it has
not been completed, then the remaining run time
is displayed.
Wait for the rinsing procedure to end.
Start-up status
The start-up process is complete following the
rinsing procedure.
Press
CONTINUE .
9 Connection
During or after start-up, the connection wizard will
guide you through the possible types of connection
and registration.
Selecting the connection type
Select the connection type used by the product
to connect to the Internet.
Refer to the related chapter for more information
on the selected connection type:
– 27
– 29
– 31
If you do not want to connect the product to the
Internet, press
X in the header to exit the connec-
tion wizard.