36
EN
Connection status
Depending on your active connections, the following
information is displayed:
Actively used Internet connection
GSM signal strength
LAN IP address
IP address / Wi-Fi signal strength
NOTE
If neither LAN nor Wi-Fi is activated, the
default IP address is used.
Use this default IP address for Wi-Fi if you
want to operate the product as an access
point with a mobile device from outside
(see chapter “12.2 Remote operation of
the product via a direct Wi-Fi connection
(access point)”, page 59).
10 Registration
Registering the product enables many additional
on the hydraulic function of the product, they nev-
You can only use all of the manufacturer services if
you register your product:
Access to the water hardness database
Regular software updates
Troubleshooting
Use of the BWT Best Water Home app
Current messages
Remote operation
To Next Page
Loading...
