9
EN
Microbiological and sensory quality of the (partially) softened water
The quality of the treated water depends greatly on the conditions under which the product is installed
and operated. The most important factors are listed in the following table.
Unfavourable conditions BWT recommendations
water
Unsuitable and marginal quality
the product.
Contact the BWT drinking water specialist
Operating condi-
tions
Long periods of stagnation, infre-
quent regeneration and incorrect
configuration of the system can
luxury water.
Observe the notes in the installation and
operating manual. Contact the BWT drink-
Quality of the regen-
erative
Impurities from inferior regenera-
tives with insoluble components
cause deposits.
Use of BWT Perla tabs or regeneratives
in accordance with DIN EN 973, type A.
Installation situation
and conditions
Temperatures in the installation
room greater than 25 °C, evapo-
ration of solvents or an improper
waste water connection may ad-
versely affect the quality of the
luxury water.
Observe the notes in the installation and
operating manual.
When determining whether there is a problem with the sensory or microbiological quality of the treated
water, it is important where in the system the quality is measured. For example, if the quality is measured
or hot water storage tank.
To Next Page
Loading...
