359
Troubleshooting Guide
Set the lens focus mode switch to <AF> (p.39).
To prevent camera shake, press the shutter button gently (p.43,
44).
If th
e lens
has an Image Stabilizer, set the IS switch to <1>
(p.42).
In low light, the shutter
speed may become
slow
. Use a faster
shutter speed (p.144), set a higher ISO speed (p.106), use flash
(p.170), or use a tripod.
Set the AF oper
ation
t
o
One-Shot AF. Focus lock is not possible in
the AI Servo AF and AI Focus AF operations (p.69).
Depending on the shutter speed, aperture, subject conditions,
brightness, etc., the continuous shooting spee
d may become
slower.
If you shoot something that h
as fine det
ail (such as a field of
gr
ass)
, the file size will be
larger and the actual maximum burst
may be lower than the number mentioned on page 103
.
The image is out of focus.
I cannot lock the focus and recompose the shot.
The continuous shooting speed is slow.
The maximum burst during continuous shooting is lower.
To Next Page
