Troubleshooting Guide
360
If [z4: Highlight tone priority] is set to [Enable], the settable
ISO speed range will be ISO 200-25600 (or up to ISO 12800 for
movie shooting). Even if you expand the settable ISO speed range
in [ISO speed range], you cannot set expanded ISO speeds (L, H,
H
1, H2). When
[z4: Highlight tone priority] is set to [Disable],
ISO 100/125/160 can be set (p.130).
If [z4:
Highlight tone priority] is set to [Enable], the Auto
Lighting Optimizer cannot be set. When [z4: Hig
hlight tone
priority]
is set to [Disable], then the Auto Lighting Optimizer can
be set (p.130).
Set [z3: Auto L
ighting Optimizer] to [Disable]. When
[Standard/Low/High] is set, even if you set a decreased exposure
compensation or f
lash exposure compensation, the image may
come out bright (p.15
1).
When t
he image-recording quality is set to 41 or 61, the
multiple-exposur
e image will be r
ecor
ded in 1 qua
lity (p.164).
If you shoot at night when the background is dar
k, the shutter
speed becomes slow automatically (slow-sync shooting) so that
both the subject and background are properly exposed. To prevent
a slow shutter speed, under [z2:
External Speedlite control],
set [Flash sync. speed in
Av mode] to [1/180-1/60 sec. auto] or
[1/180 sec. (fixed)] (p.173
).
ISO 100 cannot be set. ISO speed expansion cannot be selected.
The Auto Lighting Optimizer cannot be set.
Even though I set a decreased exposure compensation,
the image comes out bright.
The multiple-exposure image is shot in 1 quality.
When I use the <f> mode with flash, the shutter speed
becomes slow.
To Next Page
