Handling rolls
Removing the Roll from the Printer
Remove rolls from the printer as follows.
Note
• If you need to cut the roll, see “Specifying the Cutting Method for Rolls”. (→P .129)
1. On the T ab Selection screen of the Control Panel , press ◄ or ► to select the Paper tab ( ).
Note
• If the T ab Selection screen is not displayed, press the Menu button.
2. Press the OK button.
The Paper Menu is displayed.
3. Press ▲ or ▼ to select Eject Paper , and then press the OK button.
4. Press ▲ or ▼ to select Y es , and then press the OK button.
The roll is now rewound and ejected.
Caution
• If you have selected ManageRemainRoll > On in the Control Panel menu, a barcode is printed on
the leading edge of the roll.
Do not remove the roll before the barcode is printed. Y ou will be unable to keep track of the amount
of roll paper left. ( → P .126)
5. Positioning your hands as shown, open the Roll Cover .
1 16 Handling Paper