Messages regarding paper
Paper is crooked.
Cause Corrective Action
Follow these steps to reload the roll.
1. Push the Release Lever back.
2. Adjust the right edge of the roll to make it parallel
to the orange Paper Alignment Line .
3. Pull the Release Lever forward.
( → P .106)
If this error recurs after you reload the roll, remove
the Roll Holder from the printer , push the roll rmly in
until it touches the Roll Holder ange, and reload the
Roll Holder in the printer .
( → P .103)
Paper loaded crooked was detected when the paper
was advanced.
Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4. Reload the sheet, aligning it with the guide on the
right.
( → P .136)
Note
• T o disable this message (if it is displayed repeatedly despite reloading paper , for example), choose Off
or Loose in the Skew Check Lv . setting of the printer menu. However , this may cause jams and
printing problems because paper may be askew when printed. Also, the Platen may become soiled,
which may soil the back of the next document when it is printed.
698 Error Message
To Next Page
Loading...
Need help?
General
Weight and Dimensions
