Handling sheets
Handling sheets
Loading Sheets in the Printer
Follow these steps to load sheets in the printer .
Important
• One sheet of paper can be loaded in the Paper Feed Slot at a time. Do not load more than one sheet at
a time. This may cause paper jams.
• Before feeding paper or printing, make sure the sheet is at against the Roll Cover . The sheet may jam
if it curls before feeding or printing and the trailing edge drops toward the front.
Note
• Store unused paper in the original package, away from high temperature, humidity , and direct sunlight.
• Paper that is wrinkled or warped may jam. If necessary , straighten the paper and reload it.
• Load the paper straight. Loading paper askew will cause an error .
1. Select sheets as the paper source.
• If a print job was received
Sheets are automatically selected, and the media type and size specied by the print job are shown
on the Display Screen . Go to the next step.
• If no print job was received
1. Press the Load button.
2. Press ▲ or ▼ to select Load Cut Sheet , and then press the OK button.
Note
• If any paper has been advanced that will not be used, a message is shown requesting you to
remove it.
Press ▲ or ▼ to select Y es , and then press the OK button. Remove the paper and go to the
next step.
136 Handling Paper
To Next Page
Loading...
Need help?
General
Weight and Dimensions
