Ink T anks
When to Replace Ink T anks
Replace or prepare to replace ink tanks in the following situations.
If a message for checking the ink is shown on the Display Screen
When there is little ink left, the Message Lamp is lit and Not much ink is left. is shown on the Display
Screen . Y ou can continue to print, but prepare to replace the Ink T ank . ( → P .628)
Before print jobs and maintenance that consume a lot of ink
If little ink is left, there may not be enough for large-format printing, head cleaning, and maintenance, which
require a lot of ink. In this case, replace or prepare to replace the Ink T ank before maintenance.
If a message for ink replacement is shown on the Display Screen
When ink runs out, the Message Lamp ashes, a message regarding Ink T ank replacement is shown on the
Display Screen , and printing is disabled. Replace the Ink T ank at this point.
Maintenance 629
To Next Page
Loading...
Need help?
General
Weight and Dimensions
